|
|
|
Products
high voltage permanent magnet generator |
|
|
| Product nameï¼?strong>high voltage permanent magnet generator |
| Itemï¼?strong> |
| Detailsï¼?/td>
|
present, China all kinds of medium-sized high-voltage asynchronous motor and electrical excitation synchronous motor mainly used for large-scale power plants, mining, petroleum, chemical industry, fans, pumps and compressors, etc. supporting motors. Due to low efficiency induction motors, power factor is lower, and the actual run-time loading rate is low, resulting in serious waste of energy; and electrical excitation synchronous motor because of its structure with the collector ring and is equipped with excitation cabinet, its reliability and maintenance, poor much higher costs than the induction motor.
Permanent magnet synchronous motor due to the cancellation of the excitation winding, collector rings and excitation cabinets, and general electrical excitation synchronous motor compared to not only improve the reliability and maintainability, and its efficiency has been greatly improved; compared with the induction motor, not only efficiency, power factor is also greatly improved. Therefore, the use of medium-sized high-performance rare-earth permanent magnet synchronous motor replacement for your ordinary induction motor and electrical excitation synchronous motor can be a serious waste of energy to change the current status of our country and bring considerable energy saving effect and significant economic and social benefits. We apply finite element method to magnetic motors at maximum in case of partial to the magnetic operating point were calculated and rational design to ensure that the motor is not running in the loss of field. Our company produces a variety of working conditions by the permanent magnet motor long-running, no one took place demagnetization.
High Voltage 6000V series than the original induction motor permanent magnet motor to improve efficiency more than 2% on average, about 0.95 power factor, efficiency and power factor curves of a wide range of flat, especially for high-load rate of continuous operation of the occasion, the same energy-saving light load significantly. Technical Data of 3 phase high voltage permanent magnet generator (6KV)
| Model |
Rated output (KW) |
Rated Voltage (V) |
Current (A) |
Eff. (%) |
Power factor |
Locked rotor torque |
Break down torque |
Locked current |
Remark |
| Rated torque |
Rated torque |
Rated current |
| Synchronous Speed 1500r/min (4 pole) |
| LSCX220-4 |
220 |
6000 |
22.7 |
94.5 |
0.95 |
1.6 |
1.57 |
7.5 |
|
| LSCX260-4 |
260 |
27.1 |
94.5 |
0.96 |
1.6 |
1.57 |
7.5 |
|
| LSCX300-4 |
300 |
31.5 |
94.5 |
0.96 |
1.6 |
1.57 |
7.5 |
|
| LSCX360-4 |
360 |
38.2 |
94.5 |
0.96 |
1.6 |
1.57 |
7.5 |
|
| LSCX440-4 |
440 |
45.4 |
95 |
0.95 |
1.6 |
1.57 |
7.5 |
|
| LSCX500-4 |
500 |
50.7 |
95 |
0.95 |
1.6 |
1.57 |
7.5 |
|
| LSCX680-4 |
680 |
70.3 |
95 |
0.95 |
1.6 |
1.57 |
7.5 |
|
| LSCX850-4 |
850 |
87.2 |
95 |
0.95 |
1.6 |
1.57 |
7.5 |
|
| LSCX1050-4 |
1050 |
106.2 |
95.5 |
0.95 |
1.6 |
1.57 |
7.5 |
|
| Synchronous Speed 1000r/min (6 pole) |
| LSCX310-6 |
310 |
6000 |
33 |
95.5 |
0.94 |
1.5 |
1.55 |
7.5 |
|
| LSCX380-6 |
380 |
39 |
95.5 |
0.94 |
1.5 |
1.55 |
7.5 |
|
| LSCX400-6 |
400 |
49 |
95 |
0.94 |
1.5 |
1.55 |
7.5 |
|
| LSCX550-6 |
550 |
58 |
95 |
0.94 |
1.5 |
1.55 |
7.5 |
|
| LSCX650-6 |
650 |
66 |
95 |
0.94 |
1.5 |
1.55 |
7.5 |
|
| LSCX780-6 |
780 |
81 |
95 |
0.94 |
1.5 |
1.55 |
7.5 |
|
| Synchronous Speed 750r/min (8 pole) |
| LSCX380-8 |
380 |
6000 |
35.5 |
95.5 |
0.94 |
1.6 |
1.55 |
7.5 |
|
| LSCX475-8 |
475 |
51 |
95 |
0.94 |
1.6 |
1.55 |
7.5 |
|
| LSCX570-8 |
570 |
61.4 |
95 |
0.94 |
1.6 |
1.55 |
7.5 |
|
|
 |
[Next：]�/a>
|
|
